Manual Operated Directional Control Valve

DMG-G02

Lever Operated Directional Control Valve

Manual Operated Directional Control Valve.

DMG - Graphic Symbol.

Seven Ocean Hydraulics DMG Series directional control valves are high performance, direct operated, lever controlled, 4-way valves, with mounting interface according to NG6, CETOP-3 and NFPA-D03 standards.

These directional control valves are generally used to control the direction of flow in a circuit and would in turn control the direction of movement of a hydraulic cylinder or the motor rotation. The manual operated lever moves the control spool from neutral position to required position of "a" or "b" side.

Product Features

• 5 chamber design.
• 4-way 3-position valve.
• Manual operated by hand lever.
• Conform to NG6, CETOP-3, NFPA-D03 mounting patterns.

Product Specification

• Mounting Pattern: NG6, CETOP-3, NFPA- D03
• Maximum Operating Pressure: 3625 PSI / 250 Bar
• Maximum Back Pressure: 2030 PSI / 140 Bar
• Maximum Flow Rate: 16 GPM / 60 LPM
• Actuation: Hand lever

Product LiteratureRelated Products

• 

  Manual Operated Directional Valve Brochure

  ---

  Seven Ocean Hydraulics Manual Operated Directional Control Valves Brochure - DMG.

  ---

---

• 

  Cam Operated Directional Control Valve

  CDV-G02

  ---

  Seven Ocean Hydraulics CDV Series Valves are roller cam directional control valves, available with 4-way and 2-position, with mounting interface according to NG6, CETOP-3 and NFPA-D03 standards.

  ---

• 

  Right Angle Check Valve

  CRG

  ---

  Seven Ocean Hydraulics CRG Series Valves are right angle check valves with fixed cracking pressure which allow free flow of fluid in one direction and are restricted from flowing in the reverse direction.

  ---

• 

  Pilot Controlled Check Valve

  CPDG

  ---

  Seven Ocean Hydraulics CPDG Series Pilot Controlled Check Valves are much like direct operated valves, they permit free flow in one direction and prevent flow in the reverse direction, however, pilot operated valves permit reverse flow when a pilot pressure signal is applied to the valve's pilot port.

  ---

• 

  Pre-fill Valve

  PFV

  ---

  Seven Ocean Hydraulics PFV Series Pre-fill Valve is a type of non-return valve or drain valve. The pre-fill valves are used to suction / discharge hydraulic fluid between a cylinder and a tank.

  ---

• 

  Forklift Transmission Control Valve

  FD20AE

  ---

  Seven Ocean Hydraulics Forklift Transmission Control Valve - FD20AE applies to internal-combustion, electro-control shift forklift and is designed for transmission gearbox of forklift transmission. It includes the inching valve, pressure accumulator and solenoid directional control valve.

  ---

---